<\/span><\/h2>\n\n\n\nEven when the DSP operates in synchronous output mode, it’s impossible to guarantee that skew between TX optical lanes is reduced to zero. Due to differences in circuit designs among DSP manufacturers, the stability of the synchronous output mode itself and the residual skew can vary. We cannot simply deem optical modules with significant residual skew in synchronous output mode as defective based on 4-channel oscilloscope eye diagram results, as the IEEE 802.3 standard has very loose requirements for skew (32UI skew variation for 53.125Gbaud SP3). Ultimately, we must evaluate the module’s quality based on post-FEC bit error rate and sensitivity test results on the switch. (The author believes these are the core indicators determining optical module performance.) The ultimate purpose of TX optical eye diagram testing is to serve the post-FEC bit error rate and sensitivity tests; we cannot sacrifice good products for the sake of using 4-channel parallel testing to improve efficiency.<\/p>\n\n\n\n
Parallel testing with 4 channels introduces additional jitter due to skew compared to single-channel scenarios, placing greater pressure on the oscilloscope’s triggering. Whichever oscilloscope manufacturer has stronger filtering capabilities for this type of jitter will measure eye diagram quality closer to single-channel results in 4-channel scenarios and can accommodate DSP chips with larger skew. Optical module manufacturers must thoroughly validate the degradation in eye diagram quality for their TX optical scheme in 4-channel versus single-channel scenarios before procurement, ensuring it is within tolerance before finalizing the decision.<\/p>\n\n\n\n
<\/span>Why FiberMall Excels in <\/strong>1.6 T<\/strong> Optical Module Solutions<\/strong><\/strong><\/span><\/h2>\n\n\n\nBy meticulously addressing these aspects of TX parallel testing for 800G and 1.6 T optical modules\u2014from architecture and skew management to synchronous configurations and triggering challenges\u2014manufacturers can achieve optimal production efficiency without compromising on quality or reliability.<\/p>\n\n\n\n
FiberMall is committed to delivering innovative, cost-effective solutions that empower your optical-communication infrastructure. Whether you’re enhancing AI-enabled networks or scaling data center operations, our expertise ensures reliable performance. Visit our website for more insights, or reach out to our team for personalized support.<\/p>\n\n\n\n
<\/p>\n