Question 2: What is the uplink port of the 10GbE Layer 3 all-optical aggregation network switch?<\/strong><\/p>\nThe uplink port is 40G, which can connect core layer devices upward, and the whole machine belongs to an all-optical 10 Gigabit switch. This switch supports and realizes the number of 10G\/1G interfaces \u2265 20, the number of 25G\/10G interfaces \u2265 4, and the number of 40G interfaces \u2265 2 to achieve port upgrade and rate upgrade.<\/p>\n
\u00a0<\/p>\n
Question 3: Does this switch need a separate power supply?<\/strong><\/p>\nThe switch has 2 modular power supply slots, which require at least one additional power supply. The power supply model is RG-PA150I-F, which can also be equipped with dual power supplies for redundancy.<\/p>\n
\u00a0<\/p>\n
Question 4: What is the power supply voltage of this aggregation witch?<\/strong><\/p>\nThe maximum AC input voltage range is 90-264VAC, the frequency is 47\/63Hz, and the rated input current is 3A. The maximum voltage range for the HV input is 192-288VDC. The rated current of each input is 3A and a 150W AC power module is supported.<\/p>\n
\u00a0<\/p>\n
Question 5: How to solve this aggregation switch port failure?<\/strong><\/p>\nThe device supports fault isolation technology to monitor the status of the optical module. Once a fault occurs, it can immediately identify and isolate the faulty module to ensure that it does not affect other ports and the normal operation of the entire system. After replacing the module, the port can immediately return to normal operation.<\/p>\n
\u00a0<\/p>\n
Question 6: What are the management methods of Layer 3 10GbE all-optical port aggregation switch?<\/strong><\/p>\nAdministrators can use command line interface (CLI), Web network management, Telnet, and other methods, and support SNMP, RMON, Syslog, USB backup log, and configuration features for daily diagnosis and maintenance of the network to achieve diverse management and maintenance methods and more convenient management of the device.<\/p>\n
The device also supports hardware health status visualization, which can monitor fan status, power supply, temperature, and onboard voltage, especially when abnormal voltage precursors are found during daily inspections, which can be handled in time to avoid abnormal voltage downtime.<\/p>\n\n\n
Recommend Reading\uff1a<\/strong><\/p>\n\n\n\nUnderstanding Access Switches: Key Components of Your Network Switch Setup<\/a><\/p>\n
![\"Cisco\u2019s](\"https:\/\/www.fibermall.com\/blog\/wp-content\/uploads\/2022\/07\/Ciscos-aggregation-switch-300x131.png\")
<\/p>\n